Kemox Abrasive Slurry / Slurries
Kemet offer a comprehensive range of suspension treated Abrasive Slurries where the abrasive and carrier are pre-mixed in the correct proportions, resulting in a cleaner and more efficient Lapping Process.
Kemox is a conventional abrasive slurry that has been suspension treated so that the abrasive particles do not settle out into a hard sediment in to bottom of the abrasive tank. Kemox is available in water soluble (Kemox –W) or oil soluble (Kemox-O) formulations in 5 or 20 Litres. Advantages of using Kemox include:
- No mixing necessary (Pre-Mixed Abrasive)
- Abrasive slurry concentration is always correct
- Always ready to use
Kemox W - Our Newest Lapping Suspension
New water-based formulations have been developed so that very low Ra and Rz figures can be produced without the need for secondary lapping or polishing processes. Until now it has been almost impossible to achieve a scratch free finish when using fine alumina on a Cast Iron lapping plate, but with these new formulations, uniform scratch free finishes are easily obtainable.
This is even more of a benefit when pre lapping softer materials that need to be mirror polished. With these Kemox formulations a very fine surface can be generated prior to secondary pad polishing which reduces the polishing time needed, thus reducing any edge roll off and orange peel. Product Codes below for Kemox W, available in 3 and 6 micron.
| Product | Size | Code | Abrasive Slurries Description |
|---|---|---|---|
| Kemox O-960 | 5 Litre | 300101 | Oil based abrasive slurries. Finest surface finish on soft components |
| Kemox O-950 | 5 Litre | 300102 | Oil Based. Finer surface finish on soft components |
| Kemox O-900 | 5 Litre | 300103 | |
| Kemox O-800 | 5 Litre | 300104 | Oil Based. General aluminium oxide lapping where a scratch free matt lap is required |
| Kemox O-800S | 5 Litre | 300112 | |
| Kemox O-800 (Fine) | 5 Litre | 300107 | |
| Kemox O-800 FHC | 5 Litre | 300109 | |
| Kemox O-400 | 5 Litre | 300105 | Oil Based. Plate conditioning and matt lapping where good stock removal and a matt lap is required |
| Kemox O-400S | 5 Litre | 300111 | |
| Kemox HSR | 5 Litre | 300195 | Oil Based. Faster stock removal |
| Kemox W-950 | 5 Litre | 300152 | Water based where oil can't be used. Finer surface finish on soft components |
| Kemox W-800 | 5 Litre | 300143 | Water based abrasive slurries |
| Kemox W-400 | 5 Litre | 300141 | |
| Kemox SF | 1 Litre | 300207 | For mirror polishing of aluminium |
| 3.8 Litre | 300200 | ||
| 5 Litre | 300199 | ||
| Kemox W (3 micron) | 300234 | Developed so that very low Ra and Rz figures can be produced without the need for secondary lapping or polishing processes. Water Based | |
| Kemox W (6 micron) | 300235 |
Before and after using Kemox SF on Aluminium
